|
 BREL International -- New product release for 2018:
BREL International will be attending Electronica-2018 in Munich, Germany from November 13 to November 16, 2018.
We would like to announce the availability of micro-miniature leaded MLCC-Multilayer Ceramic Capacitors in our CLC2 case (0.050 x 0.040 x 0.100 inches)up to 22uFd/6.3VDC with an X5R temperature coefficient. The extended range of the CLC2 product is available now. It extends the range of the capacitance value into the area normally supplied by leaded tantalum capacitors without concern for polarity. Reverse polarity of a leaded tantalum capacitor will damage the dielectric material and cause product failure. |
|
BREL International -- 2017 . . . |
|
BREL International -- For Immediate Release . . .
BREL International ISO 9001:2015
 First Issued: December 15, 1999
Valid Until: November 13, 2020
Reissued: November 21, 2017
Press Release - 21 November 2017:
BREL International, manufacturer and worldwide distributor of passive electronic components, completed a 2014 ISO9001 re-registration audit with 0 Major findings, 0 Minor findings, and 0 Observations. BREL International was first certified to the ISO9001 standard in 1999. BREL International remains committed to the ISO9001 Quality System certification as an integral part of their quality program. BREL International is now re-registered and certified to the worldwide Quality Standard ISO9001:2015 through 13 November 2020. The team at BREL International was supported by Michael B. Yonker (ISO Management Rep) and led by Robert Chvojka (Assistant ISO Management Rep).
|
|
BREL International -- 2016 . . . |
|
BREL International -- For Immediate Release . . .
BREL International ISO 9001:2015
First Issued: December 15, 1999
Valid Until: November 13, 2020
Reissued: November 21, 2016
Press Release - 21 November 2016:
BREL International, manufacturer and worldwide distributor of passive electronic components, completed a 2014 ISO9001 re-registration audit with 0 Major findings, 0 Minor findings, and 0 Observations. BREL International was first certified to the ISO9001 standard in 1999. BREL International remains committed to the ISO9001 Quality System certification as an integral part of their quality program. BREL International is now re-registered and certified to the worldwide Quality Standard ISO9001:2015 through 13 November 2020. The team at BREL International was supported by Michael B. Yonker (ISO Management Rep) and led by Robert Chvojka (Assistant ISO Management Rep).
|
|
BREL International -- 2015 . . . |
|
BREL International -- For Immediate Release . . .
BREL International ISO 9001:2015
First Issued: December 15, 1999
Valid Until: November 13, 2020
Reissued: December 1, 2015
Press Release - 21 November 2015:
BREL International, manufacturer and worldwide distributor of passive electronic components, completed a 2014 ISO9001 re-registration audit with 0 Major findings, 0 Minor findings, and 0 Observations. BREL International was first certified to the ISO9001 standard in 1999. BREL International remains committed to the ISO9001 Quality System certification as an integral part of their quality program. BREL International is now re-registered and certified to the worldwide Quality Standard ISO9001:2015 through 13 November 2020. The team at BREL International was supported by Michael B. Yonker (ISO Management Rep) and led by Robert Chvojka (Assistant ISO Management Rep).
|
|
BREL International -- 2014 . . . |
|
BREL International -- For Immediate Release . . .
BREL International ISO 9001:2015
First Issued: December 15, 1999
Valid Until: November 13, 2020
Reissued: November 21, 2014
Press Release - 21 November 2014:
BREL International, manufacturer and worldwide distributor of passive electronic components, completed a 2014 ISO9001 re-registration audit with 0 Major findings, 0 Minor findings, and 0 Observations. BREL International was first certified to the ISO9001 standard in 1999. BREL International remains committed to the ISO9001 Quality System certification as an integral part of their quality program. BREL International is now re-registered and certified to the worldwide Quality Standard ISO9001:2015 through 13 November 2020. The team at BREL International was supported by Michael B. Yonker (ISO Management Rep) and led by Robert Chvojka (Assistant ISO Management Rep).
|
|
BREL International -- 2012 . . . |
|
BREL International -- July 2012 - For Immediate Release
CHR-Series
Chip Resistors , Non-magnetic
Sizes: 0402, 0504, 0603, 0805, 1206, 2010, 2512, 4020
Features:
Chip Resistors in thick film technology
Non-magnetic
Pt/Ag terminations for conductive gluing and soldering
RF-versions untrimmed
Suitable for high vacuum applications – no organics
High temperature application possible (up to 300°C as CHR-HT)
|
|
from BREL International ...
RMB16A Update
Released April-2012
Brel International releases next generation micro-miniature axial leaded resistor for the Hearing Aid industry. |
|
|
|
|
BREL International -- For Immediate Release . . .
BREL International ISO9001:2008 ~
First Issued: December 15, 1999
Valid Until: November 28, 2014
Reissued: November 28, 2011 |
|
BREL International -- 2011 . . . |
|
BREL International -- January 1, 2011 -- For Immediate Release . . .
New datasheet released for Type MLCC-VA Multilayer Chip Capacitor-Now includes "R" in part number confirming RoHS Compliant parts and other updates to our MLCC-VA product line. |
|
BREL International -- 2010 . . . |
|
BREL International -- December 2, 2011 -- For Immediate Release . . .
ISO9001: 2008 Annual Surveillance Audit successfully passed with no discrepancies found. Certificate is valid until 12/15/2011. |
|
BREL International ISO9001:2008 ~
First Issued: December 15, 1999
Valid Until: December 15, 2011
Reissued: December 9, 2009
BREL is now certified and registered to the ISO9001:2008 Quality Standard.
"BREL International, worldwide manufacturer and distributor of electronic components, recently passed its assessment audit to the ISO9001:2008 international quality standard.
BREL International passed the audit with a triple zero finding: zero major, zero minor, and zero observations. In its nine year history of being certified to ISO Quality Standards this was the first audit with zero findings, a rarity among organizations registered to the International Organization for Standardization (ISO).
The management team of BREL International was supported by Michael B. Yonker (Owner and Management Rep.) and Bob Chvojka (Assistant Mgt. Rep.) leading the team."
* Certifying Registrar 10554 - NQA National
Quality Assurance USA of Acton, MA
|
|
BREL International -- Product End-of-Life (EOL) Notice -- For Immediate Release
RMB16, CLT, and CLC will be discontinued as of January 31, 2010
with final delivery by March 31, 2010
* View PDF file for more info...
|
|
BREL International -- 2009 . . . |
|
BREL International -- March 1, 2009 -- For Immediate Release
RoHS Certificate of Compliance
SMD Type – CCK, CCF, CHM/CRM, CHR, CHS, CMF, CRA/CRB, CRS, CRW
Leaded Type - CLC, CLT, RMB
* View PDF file for more info...
BREL International herewith confirms that RoHS-compliant products are conforming to EU directive 2002/95/EC (RoHS) and EU directive 2003/11/EC.
|
|
BREL International -- 2008 . . . |
|
BREL International ISO9001:2000 ~
First Issued: December 15, 1999
Valid Until: November 14, 2010
Reissued: December 15, 2008
* Certifying Registrar 10554 - NQA National
Quality Assurance USA of Acton, MA
|
|
BREL International -- April 3, 2008 -- For Immediate Release
Application Note and Technology Update for Non-magnetic Chip Resistors and
Capacitors and Chip Resistors for High Temperature Applicationss
* View PDF file for more info...
The special technological aspects of these components produced by BREL International are the materials of the contact areas, which contains no Nickel, so they are nonmagnetic. The contact areas are made by noble metal alloys based on Pt-Ag and Pt-Pd-Ag, available as thickfilm pastes, which are applied by roller-coating or dipping
processes onto the wrap-around areas of the chip components and fired in the range of 850ºC.
|
|
BREL International -- 2007 . . . |
|
BREL International -- December 2007 - Issue 1-- For Immediate Release
* Ref: Type CRS-Thickfilm Chip Resistor-December 2007-Issue 1-Rev 1
Standard Chip Resistors
Type: CRS
Sizes: 0504, 0603, 0805, 1206
Features:
•Chip Resistors in Thickfilm
• Resistance element glass-passivated
• Contact areas Nickel-barrier / matte tin
• RF-versions untrimmed
• Resistance values up to 500 MΩ
• Working voltage up to 600 Volts
• Suitable for high vacuum applications – no organics * View PDF file for more info...
|
|
BREL International -- January 2007 - Issue 2-- For Immediate Release
High Value Chip Resistors in the Precision Range-Type CHM/CRM Thickfilm Chip Resistor-Now available in either Pt/Ag or Nickel/Tin Termination.
Features:
• Meander structured High Value Chip Resistors in Thickfilm
• Low temperature and voltage dependency
• High Working Voltage up to 3000V
• Suitable for high vacuum applications-no organics * View PDF file for more info...
|
|
BREL International -- 2006 . . . |
|
BREL International -- January 2006 - Issue 1-- For Immediate Release
High Value Chip Resistors in the Precision Range-Type CHM Thickfilm Chip Resistor
Features:
• Meander structured High Value Chip Resistors in Thickfilm
• Low temperature and voltage dependency
• Contact areas PtAg for conductive glueing and soldering
• High Working Voltage up to 3000 V * View PDF file for more info...
|
|
BREL International -- 2005 . . . |
|
BREL International -- September 2005
The European Union (EU) is introducing new legislation that will affect the electronics industry.
The coming RoHS directive (Restriction of Hazardous Substances) will ban six materials from Use. General RoHS Information is now available in the catalog section under RoHS and Lead Free information. * View PDF file for information...
|
|
BREL International -- July 2005
Type MRS-Miniature Leaded Resistor
Features:
- Resistor element in Thickfilm
- Solder coated copper wire
- Molded encapsulation of element and solder joint
- Standard resistance range of 1R0Ω to 10MΩ
- Higher and lower values on request
* View PDF file for more info... CLICK HERE for PDF Press Release...
|
|
BREL International -- February 2005 -- For Immediate Release
MLCC - Updated RoHS Policy - 16 February 2005
In an effort to meet the RoHS directives aimed at reducing hazardous substances, BREL Inter-national provides MLCC products that are RoHS compliant and have a Lead Free 2nd Level
Interconnect... * View PDF file for more info...
|
|
BREL International -- January 2005 -- For Immediate Release
Type CCT Tantalum Chip Capacitor
The world’s smallest surface mount. Tantalum capacitor, small enough to create space providing room for ideas to grow. The Type CCT is a major breakthrough in miniaturization without
reduction in performance.. * View PDF file for more info...
|
|
BREL International -- 2004 and before . . . |
|
BREL International -- Sept 2004
Resistor-RoHS and Lead Free Certification-September 2004
“Lead-Free” products fully comply with the RoHS Directive.
• Lead Free Certification According to the EU RoHS Directive
• September 2004 * View PDF file for more info...
|
|
Now Available From
BREL International
Ceramic Capacitor
Temperature Coefficient
(TC) Coding |
|
|
 BREL International releases the CLC6-Microminiature Axial Leaded MLCC Capacitor in size 0.052x0.052x0.100 inches with capacitance up to 2.2uFd/6.3VDC in X7R |
|
from BREL International ...
HTA - High Temperature Abrasion Sensor
Features:
 Variable steps of abrasion are possible
Recording of high temperature range
Many variations of geometry
Only two cables necessary |
|
|
|
from BREL International ...
Type CLC-Miniature Ceramic Capacitor
The CLC series MLCC-Multilayer Ceramic Capacitor is available in four case sizes. The CLC2 is only 0.040" high by 0.050" wide by 0.100" long, the same size as the BREL Tantalum CLT "W" case size. This allows the lower capacitance value ceramic capacitors to fit into the same designs as the BREL tantalum capacitor's "W" case size. It uses the same solder coated pure nickel lead wire as our RMB16 and CLT series and is suitable for either soldering or welding. Axial or Radial Leads (CLC1 only). |
|
|
from BREL International ...
Type CLT-Miniature Tantalum Capacitor
The CLT series is now available in three case sizes. These precision micro-miniature polarized capacitors are especially suitable for general filtering, de-coupling, bypassing, and RC timing application. The CLT series operates to +85C without derating and up to +125C with derating. The favorable capacitance to volume ratio has made this series the leader in high-density application such as hearing aids. |
|
from BREL International ...
Surface Mount Electrolytic Capacitors are now available.
V-Chip Series Aluminum Electrolytic Capacitors supplied in a wide range of types to meet all design and application requirements. |
|
|
|
